Slik u212 center support bushing skin#
Slik u212 center support bushing full#
Slik u212 center support bushing pro#

I've used kitchen/canning paraffin, wiping down the excess after working it around a bit. If the collets and internals are smooth but the center column and telescoping leg sections still bind, a bit of non-abrasive wax might help. If the collets are metal like the older Manfrottos check for burrs and roughness. Eventually I figured that Slik knew what they were doing, it's one of their oldest tripod designs, and I should just leave it the hell alone and use the tripod as intended. Later I broke a nylon friction bushing by trying 'improve' the tension of the leg spreaders.

Slik u212 center support bushing pro#

If you are looking for a new tripod, Slik will make this model:Slik Pro 780DX Tripod with 3-Way Pan/Tilt Head (Quick Release) - Supports 15 lbsB& H SLP780DXB Mfr 615-780This will accommodate up to 15lbs, and will extend up to 61.8 without using the center column. The head is virtually all plastic, and all it needed was adjustment to the tensioning devices for the nylon collets. Mfr 618-752) will be the correct part for your U-112 tripod. The lube softened the internal plastics and caused it to lock up completely. I once screwed up a Slik U212 pan head by trying to 'improve' it with lubricant. Don't add any lubes - these can make things worse with synthetics. If the collets are nylon or other synthetic it should be self lubricating - friction should be adjustable. I tend to use my tripods at ground level, often in damp conditions or where there's a lot of sticky sap, so they get grungy fairly often.

Slik u212 center support bushing skin#

Normal handling can transfer enough skin oil, salt and grime to gum up the smoothness of a snugly mated center column, so wipe it down once in awhile. Wipe down the mating surfaces between the collets and center column and see if it improves. Lubricants are likely to attract debris so avoid it if you can. Most tripods are easy to disassemble to check for roughness and cleaning. These can be a bit fiddly to get just right.įind out whether the collets are metal or synthetic before trying any lubricant.

With some tripods there are two collars that control the center column smoothness: one for tensioning the other to lock the tensioning collar in place. The head also includes a bubble level for accurate vertical positioning.Check the tensioning devices first. A geared center column makes fine height adjustments easy.Ī threaded mounting post on one leg lets you bring the camera down to just 8 inches (200 mm) from the ground for low angle photos, macro photography in the field, or copy work. The head has a lens calibrated panorama guide to make 360 &Mac176 panoramas from multiple pictures. The quick release camera post is smaller than most quick release plates and can be left on the camera almost all the time, so the camera is always ready to be mounted on the U-212 DX's ultra-smooth 3-way pan-head. The U212 deluxe was one of the first tripods to feature speed release leg locks on three-section 'NON-TWIST' squared legs that will not turn and have retractable rubber leg tips and spikes for sure footing on any surface. Designed primarily for light weight 35mm SLR cameras or compact film and digital cameras, it features a number of exciting design concepts that were born with the original U 212 and have been copied into other tripods world-wide. SLIK USA Customer Service Specialist, Glenn Nash, guides you through the process of replacing the crank handle on a U212 / U212 Deluxe (Universal 212) tripod.

The award winning U 212 DX is world-renowned designing that has carefully evolved for more than 20 years. It's not really the thing you would want to lug along on a two or three day wilderness trek.All in all I like this tripod.

Slik u212 center support bushing full#

There is a little loss of stability at full height due to a slight column wiggle but at high shutter speeds it's not noticeable.The one complaint I do have is the weight of the tripod. As I am quite tall, I like the full extension height of the column.

had the tripod operational again in less than 30 minutes. The longest lens I have used on it has been a 500mm and the tripod performed beautifully even with Semi-trucks going past at 65 mph less than 15 feet away.(I was feeling the effects of their going by) I have experienced the clamp cracking problem myself and was able to purchase a replacement clamp from Slik Co. For me it has been a solid, stable platform for night shots, Macro work, floral and Landscape photography. I have had my U-212 for 16 years now and Have no major complaints.